The switch of cleaners and washers of wind and back glasses

A cleaner and a windscreen washer operate when the ignition. Positions of the switch (Fig. 1.32) for controlling the operation of the windscreen wiper:

- Move the switch up - the inclusion of a single stroke of the windscreen wiper;

- Switch up to the first detent position "1" - including windscreen wiper;

- Move the switch up to the second fixed position "2" - the inclusion of a high speed operation of a cleaner;

- Move the switch down - the inclusion of a cleaner mode with an interval of 6 s. On some car models, you can change the interval wiper operation in the range of 1.5 to 22.

To set the time interval, do the following:

- Move the switch down;

- Switch back to the original position and after the desired period of time, move the switch down again. After turning off the ignition duration of the time interval is automatically translated into the main mode - 6.

When the windshield washer is activated simultaneously with the cleaner. To activate the washer to move the switch in the direction the steering wheel.

The temperature of the heating windshield washer nozzles automatically adjusted depending on the temperature outside the car. When you release the switch to its original position the washer is turned off and cleaner will continue to operate for about 4 seconds.

When the head light simultaneously with the windscreen washer includes cleaners and headlight washer.

To activate the rear window wiper to move the switch in the direction of the steering wheel - cleaner will operate every 6 seconds. Repeatedly pressing the switch cleaner off. For simultaneous switching wiper and washer rear window, move the switch in the direction of the steering wheel and hold in this position. The duration of wiper and washer is determined by the hold switch pressed. When returning the switch to its original position washer off - cleaner will run for about 4 seconds.