 printable version
Check / removal and installation of valve fuel cut
If the engine will continue to operate after the ignition is switched off, check valve fuel cut. Check | - Leave the engine idling.
 | - Disable combo connector valve and the fuel cut solenoid vent.
|
- If the engine stops, the valve is defective fuel cut when the engine continues to run, the valve must be replaced.
|
|
Withdrawal | - Remove the air filter.
- Disable combo connector valve and the fuel cut solenoid vent.
 | - Unscrew the valve fuel cut -strelka-.
|
- Unplug the check valve of the plug housing combined.
|
|
Setting | - Install the valve stopping delivery of fuel to the new seal and screw it.
- Insert the plug into the body of the combined connector.
- Connect the combination plug.
- Install an air filter.
|
|
|
