| 1. Check the seal on the porosity and the absence of damage, replace it if necessary. |
| 2. Insert the tail light glass with gasket into the body from the outside. |
| 3. Push the reflector uniformly tighten the lock nuts. |
| 4. Insert the lamp holder and lock it by turning the plastic handle to the right. |
| 5. Push the plug connector. |
| 6. Install the interior trim. |
 | 7. Turn the plastic knob on the horizontal taillights and remove the lamp holder. |
| 8. Loosen the mounting nut (42). |
| 9. Take out the glass rear light (44) with the seal (43), remove the reflector inside. |
