Front brakes |
Type | Disc (solid wheels for vehicles of 1.4 liters and ventilated on the cars of 1.6 liters) |
Designation: |
- For vehicles of 1.4 liters | CL18C |
- For vehicles of 1.6 liters | CL18VD |
The diameter of the disk (all cars) | 240 mm |
The thickness of the new drive: |
- CL18C | 12.0 mm |
- CL18VD | 18.0 mm |
Reserve: |
- CL18C | 10.0 mm |
- CL18VD | 16.0 mm |
Runout | not more than 0.07 mm |
The thickness of the lining | not less than 2.0 mm |
Rear disc brakes |
Designation | AD7HA |
The diameter of the disk (all cars) | 234 mm |
The thickness of the new disc | 7.0 mm |
Limiting | 6.0 mm |
Runout | not more than 0.07 mm |
The thickness of the lining | not less than 2.0 mm |
Rear drum brakes |
Designation | LT18C |
The inner diameter of the drum: |
- New | 180 mm |
- Limit | 181 mm |
Roundness | 0.03 mm |
The thickness of the lining | not less than 1.5 mm |
Pedal |
The distance from the floor of the body: |
- For vehicles with right-hand drive: |
??? with manual transmission | 155 - 165 mm |
??? with automatic transmission | 164 - 174 mm |
- For vehicles with left-hand drive: |
??? with manual transmission | 148 - 158 mm |
??? with automatic transmission | 157 - 167 mm |
Free travel | 1 - 3 mm |
Servo |
Diameter of the diaphragm: |
- For vehicles of 1.4 liters | 205 mm |
- For vehicles of 1.6 liters: |
??? Primary | 180 mm |
??? secondary | 155mm |
Pusher protrusion (vacuum at 500 torr) |
- Amplifiers C180 and S180 | 4.875 - 5.125 mm |
- Amplifiers M165T, M195T, S205 and C205 | 10.275 - 10.525 mm |
Pressure regulator rear brakes |
In vehicles of 1.4 liters and 1.6 liters without ABS-system: |
- RHD | a metering valve for the circuit 2, is mounted separately from the main cylinder |
- LHD | metering valve circuit 2 is built into the main cylinder |
The 1.6-liter cars with ABS-system | The valve is double the load variable gain and reduce the pressure point of bifurcation |
The diameter of the main cylinder | 20.64 mm |
Hand brake |
Number of clicks complete braking: |
- For drum brakes | 5 - 6 |
- For disc brakes | 7 - 8 |
Number of clicks on the control lamp | less than 1 |
Bleed screw | 10 |
Nuts pipe fittings | 16 |
Bolt ring fitting (banjo) | 18 |
Fingers caliper front brakes | 25 |
Bolts front caliper to the bracket | 60 |
Fingers caliper rear brake | 35 |
Bolts of a back support to the bracket | 45 |
Eccentric nut handbrake | 40 |
Bolts wheel cylinder rear brake | 8 |
Bolts shield brake rear drum brakes | 45 |
Nuts of fastening of the main cylinder | 10 |
Bolts and nuts pedal bracket and servo | 15 |
Bolts handbrake lever | 10 |