1. Open the hood. |
2. Carefully slide the front grille and pull the cable out of staples. |
3. Remove the three screws and remove the lock. |
4. Pull the spring and remove the cable from the lever lock. |
5. On the part of the vehicle, remove the cable bracket. |
6. On the part of the passenger compartment, remove the screw side of the decorative panel in the niche driver's footwell. Remove the latch and remove the seal from the edge of the panel, remove the panel. |
7. Remove the two screws and remove the lever. |
8. Remove the cable from the clamps and pull out the engine compartment. For ease of assembly is recommended to fix the track rope rope. On the part of the vehicle to access the need to remove the rope and pull in the direction of some of the details. |
9. The cable is installed in reverse order. After check the operation of the castle. |