REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
		The system of the engine is started
		Coupling
		Transmissions
		Axles
		Brakes
		Suspension and steering
		Body
			Technical data
			Maintenance
			Minor damage to the body
			Major damage to the body
			Front bumper
			Rear bumper
			Hood
			Cable the bonnet
			Hood lock
			Door
			The inner door panel
			The door lock switch, lock parts and handles
			Glass doors and windows
			The boot lid (Saloon)
			The cover of the cargo hold (coupe and hatchback)
			Lock lid (Saloon)
			Lock the cover of the cargo hold and the handle
			Details of the central lock
			Exterior glass
			The windshield, rear glass and fixed glass
			Luke
			Decorative trim body
			Seats
			Interior trim panel
			The middle section of the front panel
			Details of forward facing of salon
		Electrical

Rear bumper

Withdrawal

PERFORMANCE ORDER

1. Raise the rear of the car and establish on supports.
Cars sedan and hatchback

2. Remove the two screws securing the bumper pads to the rear wing (left) and the screw fastening lining to the edge of the wheel arch (pictured right).

3. Working in the trunk, lift carpets, remove plugs (left) and remove the 2 bracket bolts to the bottom of the bumper (pictured right).

4. Remove the bumper (left) and brackets (pictured right).
5. If necessary, trim the bumper can be removed separately by disconnecting the latch.
Cars coupé
6. Remove the license plate and bracket.
7. Remove the screws that secure the bumper pad at the edges of the rear wheel arches.
8. Remove the latch and remove the lower part of the bumper cover.
9. From the side of the cargo compartment, unscrew the bolts to the sides of the bumper wings.
10. From the side of the cargo compartment, unscrew the nuts of the bumper to the upper body.
11. To access the bolts, remove the covers on the corners of the cargo compartment.
12. Remove the screws, slide the bumper, disconnect the connector and remove the backlight sign bumper.

Setting

Bumper installed in reverse order.

« previos page
Front bumper

next page »
Hood