Castle |
1. Remove the latch on the contour of the cover and remove the inner cover. |
2. Remove the cover from the latch lock. |
3. Remove the cover and slide into the trunk light switch connector. |
4. Remove the two screws and remove the lock from the cover. |
5. Take the rod, turning the key in the lock, and skip the switch connector. |
6. Disconnect the connector and remove the lock. |
7. Install the lock in the reverse order. |
Tailgate lock switch |
1. Remove the decorative panel. |
2. Remove the retaining ring and disconnect from the traction drive lock switch. |
3. Remove the bracket and remove the switch. |
Set the switch in the opposite poryadke.Ustanovite switch in reverse order. |
Catch |
1. Remove the cover and seal. |
2. Remove the cover mat. |
3. Mark the position of the lock, remove the two bolts, remove the clamp and disconnect the cable from the drive of the lock lever. |
4. Install the clip in reverse order. before installing the trim, check the work of the castle. |