Counters |
1. Lift the lid and secure backup. |
| 2. On cars coupe and 5-door hatchback, release the lock nut, remove the hinge pin and remove the hinge. |
3. On 3-door hatchback, unscrew the two screws of the bracket. |
4. Lightly press down on the counter and, without giving straighten, remove the base from the cover. |
| 5. Remove the screws and detach the stand from the body. |
6. Set the rack in the reverse order. |
The cover of the cargo hold |
1. Disconnect the battery from weight. |
2. Remove the inner cover panel. |
3. Disconnect and label all connectors. |
4. Pull out the connectors and wiring from the cover, tying the cord and pulled through the seal. Cord leave the lid. |
5. Disconnect the hose from the washer nozzles, remove the hose, tying the cord. |
7. Ask the assistant to hold the cover. |
8. Mark the position of the loop relative to the cap. |
9. Remove the cover from the rack. |
| 10. Remove the screws and remove the cover. |
11. Replace the cover in reverse order. |
12. Pass the wires into the cover and the hose, attaching a cord. |
13. Do not tighten bolts of loops. |