 printable version
Hood
Withdrawal | PERFORMANCE ORDER | | 1. Open the hood, mark the position of the hinges on the hood. | | 2. Loosen the hose clamps on the windscreen by removing from the union. |  | 3. Remove the bolts and hinges with the assistant remove the hood. | | 4. Check the clearance of the axes in the loop, if necessary, unscrew the two screws and replace the hinges. |
|
Setting | PERFORMANCE ORDER | | 1. Install the hood Align the marks on the hinges and tighten bolts. | | 2. Connect the hose and place in brackets. | | 3. Adjust the hood. |
|
Adjustment | PERFORMANCE ORDER | | 1. Close the hood and check the clearances with adjacent body panels. If necessary, loosen the screws and adjust the position of the hinges of the bonnet, tighten the bolts. | | 2. After adjustment, check the operation of the hood lock and adjust. Latch lock shall be activated when the hood is below the edge of the wing at 1.0-1.5 mm. Release the lock bolts, adjust and tighten the screws. | | 3. If necessary, adjust the position of the front edge of the bonnet height by turning the rubber buffer is screwed into the front bulkhead of the body. |
|
|
