1. Lift the front of the car and establish on supports. |
| |
2. Remove the screws (left) and remove the bottom mudguard (pictured right). |
Cars sedan and hatchback |
| 3. Remove the screws in the wheel arches and remove the upper part of the bumper of the vehicle. |
| 4. Remove the screws and remove the lower part of the bumper from the backups. |
| 5. Working under the car, remove the four bolts of the bumper brackets to the side members. |
6. On the part of the car, disconnect the latch which plastic section of the bumper is attached to the underside of the front of the body. |
7. Disconnect the battery from weight, open connectors fog lights (if equipped). |
| 8. Remove the bumper (arrow), pull over and take out the brackets. |
9. If necessary, remove the plastic bumper cover, pulling the latch. |
Cars coupé |
10. Remove the latch and remove the protection panel wings on both sides. |
11. Remove the latches to lower part of the spoiler is attached to the body and bracket. |
12. Remove the bolts from the top of the spoiler. |
13. Disconnect the battery from weight, open the fog lamp connector. |
14. Carefully remove the bumper spoiler. |
15. From the wheel arches unscrew 5 nuts of the bumper to the front wings. |
16. Loosen and remove the screws from the top of the bumper. |
17. Remove the bumper. |
18. If necessary, unscrew the screws (working from the bottom at the front of the wing) and remove the frame buffer bumper pad. |