 printable version
The boot lid (Saloon)
Withdrawal | PERFORMANCE ORDER | | 1. Disconnect the battery from weight. | | 2. Lift the lid. | | 3. Remove the internal panel cover by releasing the latch. | | 4. Disconnect the connector and pull the connector and the wiring of the cover, tying the cord and took the seal. Cord leave the lid. |  | 5. Mark the position of the loop relative to the cap. | | 6. Supporting the cover, unscrew the screws and remove the cover |
|
Setting | PERFORMANCE ORDER | | 1. Replace the cover together, wrap bolts hinges align with the mark and tighten the bolts. | | 2. Pull the wiring in the cover, tying the cord. | | 3. Adjust the cover. |
|
Adjustment | PERFORMANCE ORDER | | 1. Close the lid and check the clearances with adjacent body panels. If necessary, loosen the screws and adjust the position of the hinge cover, tighten the bolts. | | 2. After adjustment, check the operation of the hood lock and adjust. Release the lock bolts, adjust and tighten the screws. |
|
|
