printable version

The inner door panel

Withdrawal

PERFORMANCE ORDER

1. Disconnect the battery from weight. 2. On cars with manual window regulator handle thin pry tool and remove the clips. Remove the cover. 3. Carefully pry off the cover and remove the internal handle of the lock. 4. Remove the cap and unscrew the decorative handles, pry and remove the handle. 5. To access the screw, remove the armrest window switch (or shield) and unscrew the screw. 6. Remove the remaining screws on the circuit panel (part of which is under cover). 7. On cars coupe loosen the mounting screws on the power window switch. 8. Remove the clips on the circuit panel, lift the cover and remove from brackets. 9. Apply the panel and disconnect the connector of the electric window and central locking. Lower seal the window opening is formed integrally with the panel, and it should be removed together. 10. If necessary, remove the waterproof plastic screen, hooked in the corner and carefully peel off. Try to keep the sealant screen. 11. The panel is installed in reverse order. Glue the screen around the contour of the door. The bottom seal windows must enter into the frame of the door.