printable version
Exhaust Manifold and installation -snyatie
1. Disconnect the battery from weight, remove the air filter. 2. Lift the car and establish on supports. 3. Disconnect the front exhaust manifold. Removal of the right collector 4. Remove the heat shields (photo). 5. Remove the nut collector (see photo). 6. Lift the rear of the reservoir and remove the reservoir. Left collector 7. Remove the bolts of the heat shield (photo). 8. Disconnect the recirculation. 9. Working from the bottom, remove the three screws at the top and bottom and remove the exhaust pipe (Photo 8.5). 10. Remove the manifold from the engine compartment. Setting 11. Clean the collector of the consolidation rests.
| 8.5 Sequence of release nuts exhaust manifolds 1. The right collector 2. Left collector 3.4 The front of the |
| 8.7 Details of the left exhaust manifold 1. The handset recycling 2. Laying |
12. Install the cylinder head a new gasket. Tighten bolts and nuts in the sequence (see photo). 13. Other operations are performed in reverse order.
|