 printable version
Oil pump - removal, inspection and installation
Withdrawal 1. Remove the toothed belt pulley and pallet. 2. Remove the bolts and remove the oil receiver. 3. Remove the bolts of the oil pump and remove the pump by shifting blows through the wooden disc (pictured). 4. Clean the pump. Check 5. Remove the cover and clean the parts in a solvent. Unscrew the cap and remove the pressure reducing valve (see photo).
| 16.18 Order of a tightening of bolts of a pallet 1. To the front of the engine
|
| 17.5 Details of the oil pump 1. The internal gear 2. Outdoor gear
|
6. Check the clearances of the pump (photo). If one of the gaps is different from the norm, replace the pair of gears or a pump. 7. Fill the SPLA with petroleum jelly and reassemble the pump. Setting 8. Apply sealant split plane pump. 9. Install all parts in reverse order and replace all gaskets and seals (photo).
| 17.6a Checking gap between the outer gear and the pump housing (A) between the internal gear and a crescent-insert (B) and between the outer gear and the crescent insert (C)
|
| Check the mechanical clearance 17.6b
|
| 17.9 Replacing the O-ring oil receiver
|
| 
