printable version
The order of installation of the piston of 1st cylinder at top dead center of the compression stroke.
1. To install the piston of 1st cylinder at TDC on the compression stroke crankshaft pulley provided corresponding notes. 2. In the case of the distributor put under the label output wire candle of 1st cylinder. 3. Uncover the distributor. 4. Rotate the crankshaft so that the mark on the pulley combined with the index (see photo). 5. When the slider indicates the mark on the valve housing, the piston 1 th cylinder is at TDC compression stroke. Otherwise tighten the crankshaft one full turn clockwise (360 ?�) and set 1 st cylinder piston at TDC compression stroke. 6. Now you can set at TDC of the compression stroke and the other pistons, turning the crankshaft by 120 ?� and observing the order of cylinders.
|