printable version
Roller rocker arms -snyatie and installation
1. Remove the cylinder head cover. 2. 2-3 reception release bolts roller rocker arm, in order from the end to the middle. Keep in mind that some valve open and the rocker arm is under spring pressure. Therefore, release the bolts gradually, otherwise the roller is deformed (photo).
| 5.2 Bolts roller rocker arms |
| 5.4 Removing a roller rocker arms. To verify that the details described below. |
| 6.3 Removing the housing with hydropushers |
3. Remove the bolts and store in the order of their installation (photo). 4. Remove the roller rocker arms (photo). 5. Installation is performed in reverse order. Tighten bolts evenly to the specified torque in the order from the periphery to the center.
|