REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Golf 4
		Instructions
		Engine
		Cooling system
		Fuel System
		Exhaust system
		Ventilation and heating system
		Coupling
		Transmission
		Suspension brackets and power shafts
		Steering
		Wheels and tires
		Brakes
		Body
			Care body
			Care of an upholstery and rugs
			Repair of insignificant damages of a body
			Repair of strong damages of a body
			The front body panel
			Removing and installing front bumper
			Removing and installing rear bumper
			Removal and installation of a forward wing
			Removal and installation of facing of a niche of a forward wing
			Removal and installation of facing of a niche of the rear wing
			Hood
			Hood lock
			Removing and installing radiator grille
			Removal and installation of a lateral overlay of a body
			Door
			Luke
				Drive hatch
				Removal and installation of glass sliding sunroof
				Removing and installing sealing manhole covers
				Removing and installing fairing hatch
				Removal and installation of sun screen
				Removal, installation and adjustment of the drive mechanism of the hatch opening
				Checking the parallelism of the movement of the hatch
			Purification gutter
			Mirrors
			The center console
			Removal and installation of the top furnish in space for feet of the driver
			Removal and installation of the glove compartment
			Removal and installation of a lateral covering of space for feet
			Removal and installation of overlays of thresholds
			Removal and installation of the bottom facing of the central rack
			Removal and installation of the right lateral covering of a luggage space
			Removing and installing luggage compartment floor coverings
			Removal and installation of back furnish of a luggage space
			Removing and installing front seat
			Side airbags
			Removing the rear bench seat cushion
			Removing and installing rear seat backrest
			Washers and wipers
		Electrical equipment and wiring

printable version

Checking the parallelism of the movement of the hatch

Checking the parallelism of the movement of the hatch

Arrow - adjusting label.

1 - setting lever;

2 - Management of the scenes;

and - the size

Check

PERFORMANCE ORDER

1. Remove the glass hatch.

2. The label on the adjusting lever (1) must be located on both sides between the notches in the cable guide (dimension a).

3. Management of the scenes (2) shall be recorded in the guide, and it should not be moved by hand.

4. Otherwise, the mechanism to adjust the parallel displacement.

Adjustment

PERFORMANCE ORDER

1. The adjustment can be made only after the removal of the drive mechanism of the hatch and the glass sunroof.

2. Remove the drive mechanism of the hatch.

3. Move setting lever (1) forward so that the rear adjusting label is centered between the grooves.

4. In this position, set the drive mechanism of the hatch. Sunroof drive mechanism should be in the rest position.

5. Install the glass hatch.

« previos page
Removal, installation and adjustment of the drive mechanism of the hatch opening

next page »
Purification gutter