 printable version
Removal, installation and adjustment of brake light switch
Brake light switch attached to the brake pedal bracket. When you press the brake pedal switch includes a brake light in the rear lights of the car. In addition, the brake light switch sends a signal to the beginning of the braking control unit ABS / EDS.
Withdrawal
| PERFORMANCE ORDER | | 1. Remove the cover in the recess for the driver's legs. | | 2. Disconnect the electrical connector from the brake switch. |  | 3. Turn the brake light switch (1) 90 ?� counterclockwise and remove it from the bracket. |
|
Installation and adjustment
| PERFORMANCE ORDER | | 1. Check the brake light switch. | | 2. Pull out the plug of the control body the brake light switch. | | 3. Press the brake pedal and the pedal in this position, insert the brake light switch in the bracket and turn it 90 ?� clockwise. | | 4. Release the brake pedal at the same time will automatically adjust the brake light switch. | | 5. Connect the electrical connector to the brake light switch. | | 6. Check the operation of the brake light switch. Even with a slight pressing on the brake pedal brake lights should illuminate. | | 7. Install the cover in the recess for the driver's legs. |
|
|
