1. Lift the car and fix it in a horizontal position. |
2. Remove the oil drain plug located at the end of the transmission. |
| 3. Drain the oil into a suitable container. |
4. Replace the stopper a new washer and screw the oil drain plug in place. Torque: 40-58 N ??? m |
| 5. Remove the oil check the oil level and remove the washer. Pour the required amount of oil through the hole required level plug oil until the level reaches the lower edge of the threaded hole plugs check the oil level. Recommended Oil Grade: API Service GL-4 Viscosity: SAE 80W-90A Filling volume: 2.7 L |
6. Install a new washer and screw the cap checking the oil level.
Torque: 40-58 N ??? m |
7. Start up the engine and let it run to warm up the transmission oil. Check for leaks of oil from the gearbox. |