|
|
 printable version
Removal and installation of front wiper arm
Withdrawal | - Disconnect earth cable from the battery.
 | This data is erased from the memory of malfunctions of the engine or a protective code of a radio receiver. Before disconnecting the battery should read instructions in Section Removal and installation of the battery. |
- Mark the position of the wiper on the glass with tape so they can be installed in the same position.
- Unscrew and remove the levers with axes, after removing the caps narrow screwdriver.
|
|
Setting |  | - Push the levers in the final position on the axis of the wiper and tighten with a torque of 15 Nm. In the final position, the wipers must be at a distance of 28-32 mm from the end surface of the decorative plate or the air intake grille.
|
- Set on the axis of the wiper caps.
- Connect the earth cable to the battery.
- Check the operation of the wiper.
- If available, set the clock and set the security code radio.
|
|
|
|
