add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 323 (1985 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 323
Home
 
Mazda
323
Introduction
Gasoline engines
Engine oil
Engine cooling system
Ignition system
The power supply system, the carburettor, fuel injection system
Diesel engine
Exhaust
Coupling
Manual gearbox
Automatic Transmission
Suspension and steering system
Brakes
Wheels and tires, a body, car coloring, care of the car
Electrical system
Troubleshooting the electrical system
Check the switch on the power transmission
Relay test
Check the wiper motor
Checking the direction indicators
Check stoplights
Check the rear window defogger
Disconnecting and connecting the connectors
Fuse
Replacing fuses
Removing and installing battery
Battery check
The battery discharges itself
Charging the battery
Storage Battery
Generator
Security measures for the alternator
Check the generator voltage
Removing and installing the generator
The components of the generator
Dismantling generator / replacing the carbon brushes
Removing and installing starter
Check / replacement of the traction relay of a starter
Heater, illumination system, devices
Controls and operation receptions
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Removing and installing battery



When disconnecting the battery erases the data from the fault memory of the control unit dvigateya, antilock brake system and others are constantly working appliances (eg radio and clock). Before disconnecting the read data from memory problems. Some radios have a security code. Encryption prevents unauthorized switch the receiver after a power failure. The power turns off, for example, when the battery is disconnected when removing the radio or in case of failure of the fuse. If the radio is coded, before disconnecting define a security code. If the code is not known, the receiver can only play maker.

Withdrawal

PERFORMANCE ORDER

  1. Switch off the ignition and lighting of the vehicle. This prevents damage to electronic control units (for example, the engine control unit).
  2. Open the hood. The battery is located in the engine compartment on the left side.
  1. Disconnect the cables from the battery, first earth cable -1-, -2- and then the positive cable. First remove the rubber cap -3-. Near the poles of the battery squeezed the icons + and -.
  1. Unscrew and remove the bracket -4-.
  2. Remove the battery.

The battery contains toxic substances, so it should not be disposed of with household waste. Old batteries must be handed in special items.

Setting

PERFORMANCE ORDER

  1. Before installation, clean battery terminals, suitable for this brass wire brush. To protect against corrosion cover the poles with special grease, such as grease pole BOSCH.
  2. Insert the battery.
  3. Install and screw the bracket slightly.
  4. Connect the positive cable to the positive terminal of the battery earth cable to the negative terminal of the battery.

Improper connection of the battery can lead to significant damage to the generator and electrical equipment.

  1. Wear polymer cap on the positive pole.
  2. If you want to program the radio.
  3. Set the clock.




« previos page
Replacing fuses
next page »
Battery check

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.