| 1. Put on the hub body post. |
| 2. Install the new rack and tighten the nut with the set moment. |
| 3. Attach the levers and screw nut axis. |
| 4. Place the washer and screw a new nut rod. |
| 5. On vehicles with rear drum brakes, set the pads and attach the phone. |
| 6. Remove air from the hydraulic drive. |
| 7. On cars with rear disc brakes, set the disc and caliper. |
| 8. Establish a wheel and lower the car. |
| 9. Tumbleweed car back and forth, shaking up - down. |
| 10. Tighten the nuts with the set moment. |
| 11. Check the toe of the rear wheels. |
