printable version
Engines VS
Technical data Working volume of cylinders | 2960 cm 3 | Compression ratio | 9.0: 1 | Operating procedure | 1-2-3-4-5-6 | Numbering of cylinders: | On the right side (passenger side) | 1-3-5 | From the left side | 2-4-6 | Gas distribution mechanism (all gaps and dimensions in mm) | Hydropushers | Outside diameter | 15,947-15,957 | The diameter of the hole pusher | 16,000-16,013 | The clearance between the pusher and the bore | 0,043-0,066 | Progress pusher | 10 | Rollers and rocker | The outer diameter of the roller | 17,979-18,000 | The diameter of the holes in the yoke under the roller | 18,007-18,028 | Gap | 0,007-0,049 | Camshaft | Diameter supports | Anterior | 48,000-48,025 | Rear | 42,500-42,525 | The rest | 47,000-47,025 | The diameter of the bearing journals | Anterior | 47,920-47,940 | Rear | 42,420-42,440 | The rest | 46,920-46,940 | End-play | 0.2 | The gaps in basic necks | Standard | 0,045-0,090 | Limit | 0.15 |
| Location of cylinders and direction of rotation of the distributor 1. After 1990 2. Prior to 1989, inclusively |
Heartbeat (for dial gauge) | 0.10 | End-play | 0.03-0,06 | Dimensions cams | 39,537-39,727 | Wear limit cams | 0.15 | Oil pump | The gap between the outer gear and the pump housing | 0,11-0,20 | The gap between the inner gear and crescent insert | 0.12-0.23 | The gap between the outer gear and crescent insert | 0,12-0.23 | Allen gap internal gear | 0.05-0.09 | Allen gap outdoor gear | 0,05-0.11 |
Torque (in Nm). Bolts cylinder head cover | 0.8-2.6 | Bolts roller rocker arms | 16-20 | Bolts intake manifold | 15-18 | 1 st phase of tightening | 2,5-4,3 | Stage 2 | 15-17 | Nuts intake manifold | 1st stage | 2,5-4,3 | Stage 2 | 20-24 | Exhaust manifold nuts | 16-20 | Nuts and bolts of the exhaust pipe to a collector | 24-33 | Bolt Idler | 110-120 | Central bolt camshaft | 70-78 | Timing belt tensioner locknut | 38-51 | Camshaft pulley bolts | 70-78 | Bolts cylinder head: | 1 st phase of tightening | 27 | Stage 2 | 51 | 3rd stage | Fully loosen the bolts | 4th stage | 27 | 5th stage | 48-57 | Bolts flywheel (a leading disk of the torque converter) | 86-96 | Bolts of the oil pallet | 6,1-7 | Bolts of the oil pump | 6,1-7 | Plug reducing valve | 35-62 | Bolts oil receiver to the pump | 15-18 | Bracket Bolts oil receiver | 3,6-7,2 |
| The cylinder heads and valve gear V6 engine 1. Rockers 2. Rusk 3. Plate 4. The outer spring 5. An internal spring 6. The valve stem seal 7. Guides 8. Saddle 9.26. Support washer 10. The exhaust valve 11. Bolt |
|