printable version
A flywheel (a leading disk of the torque converter) -
1. Remove the drivetrain (ch. 7). 2. On cars with manual gearbox Remove the clutch mechanism (Ch. 8). 3. Put a mark on the crankshaft flywheel orientation (photo). 4. Remove the bolts flywheel (a leading disk of the torque converter) to the crankshaft (photo).
| 19.3 Marking of the original location of the flywheel (need not to disturb the balance |
5. Remove the flywheel (a leading disk of the torque converter) 6. Check the condition of the friction surface of the flywheel. Grind the minor defects. Check the deviation from the plane of the caliber and probes. 7. Combine the labels put at dismantling and install the flywheel.
8. Further operations are performed in reverse order.
|