printable version
Parking brake
| To activate the parking brake should be strong enough to pull up the lever (arrow) parking brake. If you have a large slope of the road should be added to the first gear or set the parking lock automatic transmission. |
The parking brake lever must always be strong enough to cock then it was impossible to move from not fully tempered inadvertently parking brake. When the parking brake applied and the ignition on, the control lamp of brake system.
To release the parking brake lever slightly pull up, push the lock button and fully squeeze the lever down. A warning In order to prevent uncontrolled rolling of the car you're after a full stop of the car must always be firmly apply the parking brake. In addition, including one of the gears manual transmission or put the automatic transmission selector is in position "P".
Do not forget, apply the parking brake before driving should be fully released. Not completely released the parking brake will cause overheating of the brakes, which adversely affects the braking efficiency. In addition, this leads to accelerated wear of the rear brake linings.
|