printable version
Unlocking and locking the vehicle
To unlock the car should be, it is in range of the device, send the key in the direction of the car and briefly press the release button (1). To lock the vehicle, briefly press the lock button (2). Double-clicking the lock button (2) you turn off the self-insurance and security system alarm.
If you want to unlock or lock the vehicle directly to the key, you should first open the key bit. To do this, press the release button (3). To close the barbs You should also press this button.
When the system is self-insurance and alarm when the car is unlocked using the radio remote control to open all the locks are locked again automatically if for 30 seconds was not open, no door on the side of the car or the back door. The self-insurance and burglar alarm system in the 30 seconds of inactivity. This prevents accidental unlocking the car within range of the radio remote control locks. Unlocking a separate door Unlocking when the system is unlocking a separate door.
To unlock the car should be, is within range of the radio remote control, to send the key to the car and once briefly press the release button (1). Now only one unlocked the driver's door. Immediately turn off lanyard and burglar alarm system, which is accompanied by a brief flashing of all turn indicators.
When you press the unlock button twice a day (1) all the locks of the car unlocked. The self-insurance and burglar alarm system turned off. Synchronization
If the car by pressing the corresponding buttons on the remote control is not unlocked, it must be assumed that the code key and control unit in the vehicle are no longer the same. This can occur if before the control buttons are often pushed beyond the range of the system.
Necessary to reopen the synchronization system. The synchronization process takes less than 1 minute and is as follows:
PERFORMANCE ORDER | 1. Press once for about a second, or the release button (1) or the lock button (2) key of your remote control. The car is locked. However, the control unit detects an existing fixed code. | 2. Now once unlock or lock the vehicle mechanically with the key remote control. | 3. The key bit was identified as an effective mechanical code. New interchangeable code has been agreed between the key and the control unit. The synchronization process is completed. |
|
Unencrypted keys are available in the service enterprise a Volkswagen. The second key must be, however, is synchronized to the service enterprise a Volkswagen, as well as the head of the key code must be entered anti-theft system.
The principle may be using four key with radio remote control.
|