For the towing vehicle must first remove the grille on the bottom right of the front bumper and screw the towing eye. The towing eye is located with the on-board instruments.
PERFORMANCE ORDER
1. Push fingers with a force in the direction of arrow 1 to the upper edge of the grate and simultaneously pull in the direction of arrow 2.
2. Eyelet has left-hand thread. Screw the eye up to the stop and tighten strongly using lug wrench.
3. After use, remove the eye and place together with the onboard tool kit. Always carry a lug. Put the lid back in place.
4. Insert the lower part of the grille into the bumper. Then press the upper part of the grille into the bumper to secure the locking lugs.