printable version
Rear view mirrors
| The situation mirrors A button installed in accordance with the directions of the arrows.
L - left mirror;
About - setting;
R - right mirror.
|
Rear-view mirrors must be installed before the trip so that at any time you could see the road conditions behind the car. Installing an internal mirror PERFORMANCE ORDER | Manual setting protivoslepyaschego position | 1. In general, the situation mirrors the lever below the mirror must be directed forward. | 2. To ensure protivoslepyaschego effect should be to move the lever back. | Automatic creation protivoslepyaschego effect | 3. Setting the mirror manually. | 4. When the ignition internal mirror darkens when falling behind luminous flux (eg headlights), the intensity of darkening depends on the amount of luminous flux from behind. | 5. When the reverse gear or move the lever to position "R" mirror switch to its original position (without protivoslepyaschego effect). |
|
Installing without electric exterior mirrors
PERFORMANCE ORDER | Installation of the exterior mirrors from the inside without the actuator is carried out manually by means of a button located in the door trim. |
|
Installing exterior mirrors with electric drive PERFORMANCE ORDER | 1. To install the mirror has a rotary knob. | 2. The situation mirrors A button set in accordance with the directions of the arrows. | 3. In case of refusal, you can install the electric exterior mirrors manually by pressing on the rim of the mirror. |
|
Simultaneous installation of exterior mirrors
PERFORMANCE ORDER | 1. The first step is to install both mirrors to the original position. To do this, the mirror individually, first left, then right, as set out above. | 2. Then you can simultaneously establish both mirrors at the time when you set the left mirror | 3. After a certain time may be necessary to again cause both mirrors to the original position. |
|
Directions for use of convex and aspherical exterior mirrors
Convex mirrors increase the field of view, while the subjects are presented in a reduced form. For this reason, these mirrors only very conditionally suited to estimate the distance to the next car moving.
Aspherical mirrors have mirror surfaces of different curvature. These wide-angle mirrors increase the field of view, even more than the convex mirror. They also only very limited suitable to estimate the distance to the next car moving. Heated mirrors
Heated exterior mirrors with electric drive is carried out, it is included rear window. Ignition must be on.
For vehicles intended for export to countries with cold climates, heated exterior mirrors is included when you install the exterior mirrors using the drive. Memory for exterior mirrors
Cars with memory for driver's seat also have memory exterior mirrors.
Any fixed position door mirrors automatically stored in the memory in memorizing the driver's seat adjustments.
First, adjust the position of the driver's seat. Then mounted mirror according to setting of the driving seat. Automatic installation of the right exterior mirror when reversing
When reverse gear is right outside mirror automatically takes a predetermined position, if such a provision was previously found.
Because of this parking is provided visibility of the right curb. The mirror returns to its normal position as soon as reverse gear off.
A predetermined position of the right exterior mirror for reversing can be in accordance with the individual characteristics of the modified and stored.
|