printable version
Removal and installation of tanks and washer pump
Location nuts washer fluid reservoir
| Nut is shown by the arrow. |
Washer tank is installed in the front right side of the engine compartment.
Withdrawal
PERFORMANCE ORDER | 1. Remove the two screws securing the coolant expansion tank and, without disconnecting from it hoses, move it to the side. | 2. Unscrew the two screws holding the activated carbon filter and, without disconnecting from it hoses, move it to the side. | | 3. Unscrew the nut (arrow) securing the tank washer. | 4. Disconnect the electrical connector and remove the water pump from the washer fluid reservoir. | 5. Remove the washer reservoir. |
|
Setting
Installation is made in sequence, return to removal.
|