printable version
Removal and installation of windshield washer nozzles
Direction clicking on the windscreen washer nozzles for removing it from the bonnet | 1 - washer nozzles;
2 - arrow indicating the initial pressing of the nozzle;
3 - lock the nozzle;
4 - arrow indicating the direction of removing the nozzle |
Withdrawal
PERFORMANCE ORDER | 1. Open the hood. | 2. Hand press the spray nozzle in the direction of the vehicle and in this position, move the nozzle down and out of the hood. | 3. Remove the nozzle from the fluid hose. | 4. Separate from the bonnet wire heater nozzle windscreen washer and disconnect the electrical connector from the heater. |
|
Setting
PERFORMANCE ORDER | 1. Put on the nozzle fluid hose. | 2. Connect the electrical connector to the heater nozzle and fix the wire on the hood. | 3. Press the nozzle of a washer, lock it in the hood. | 4. Check the direction of the jet of liquid sprayed on the windshield, and, if necessary, adjust the washer nozzles. |
|
|