| 1. Turn off the ignition and remove a wire of weight from the accumulator. |
| 2. Remove the wiper arms. |
| 3. Remove the rubber seal (1) with the bulkhead (see. Fig. Arrangement of screws and seals bulkhead). |
| 4. Remove the screws (2). |
| 5. Remove the pollen filter. |
 | 6. On both sides of the car free fairing windshield by pressing the latches in the direction of the arrows. |
| 7. Remove the grille deflector, moving it from the top of the guide. |
| 8. Disconnect the electrical connector from the wiper motor. |
| 9. Remove the screws that hold the rod and the wiper arms (see. Fig. Location nuts wiper linkage). |
| 10. Remove the wiper mechanism of the vehicle. |
| 11. Using a screwdriver blade, remove the rod wiper motor crank (see. Fig. Elements of the drive mechanism of the wiper). |
| 12. Unscrew the nut of the crank to the motor shaft. Thus keep from turning the crank. Move the crank to the side, remove it from the planting of the cone of the motor shaft. |
| 13. Remove the three bolts and remove the motor from the wiper arm. |
