printable version
brake fluid
Recommended brake fluid Use the brake system of the car is only the brake fluid corresponding specifications DOT 3 or DOT 4. As the brake pads wear during operation of the vehicle brake fluid level in the reservoir will drop slightly. This is normal.
It is necessary to check the level of brake fluid in the reservoir. The brake fluid level must be between the "MAX" ("Max") and ?�MIN?� (?�minimum?�) on the tank. If the brake fluid level is near or below the ?�MIN?� (?�minimum?�) on the reservoir, carefully add coolant to the mark "MAX" ("Maximum"). Do not overfill the brake fluid (Fig. 1.221).
Topping up brake fluid When adding brake fluid, first remove the dirt and remove the tank stopper hydraulic brakes. Slowly add the required amount of brake fluid. Do not overfill the brake fluid. Carefully place the cap on the tank and tighten.
|