printable version
Handling spare wheel
To remove the spare tire, open the rear door. Remove the cover fixing screws with a screwdriver or a coin (Fig. 1.192
). Wheel wrench, loosen the nut of a spare wheel as long as the spare tire will not fall to the ground (Fig. 1.193).
Pull the spare tire from under the vehicle and remove the holder in the central part of the disc wheel (Fig. 1.194).
Installing the spare tire Put the spare tire on the ground valve up. Slide the spare tire under the vehicle and install the holder in the center of a disc wheel. Align the bracket with the holes in the disc for the wheel nuts. Brace nut wrap the spare tire until it clicks. Replace the cover fixing screws with a screwdriver or coin.
NOTE Stop tightening fasteners spare wheel after one, two clicks. |
|