printable version
Windshield Wiper Blades
From time to time you need to check the windscreen wiper blade and clean it from accumulated dirt. To clean brushes and wiper arms, use a clean sponge or cloth soaked in a solution of neutral detergent ..
ATTENTION Do not allow the wiper blades on dry glass. This can lead to rapid wear and scratches on the glass. Avoid petroleum (gasoline, engine oil, etc.) to the rubber cover brushes. |
Replacing the wiper blades To replace the wiper blades, windshield wipers lift in the upright position.
Pull the wiper cheek while pressing the lock 1 to remove it from the wiper arm (Fig. 1.214).
Installation brushes
Put the new blade to the wiper arm and push her on the wiper arm to the level shown in the figure (Fig. 1.216).
| Fig. 1.217. Fixing the brush at the end of the lever
|
Fit the brush on the lever to the "clicks" to lock it at the end of the lever (Fig. 1.217).
NOTE Do not drop the spring loaded wiper arm on the windscreen. |
|