Step | Visual inspection | Remedy |
1 | Check that the ABS warning lamp lights up for 2-3 seconds after ignition. | Yes | See the next step. |
No | Check the ABS warning lamp and wiring harness |
2 | Check if the lamp is turned off when the parking brake is released, the parking brake lever. Check that the warning lamp lights up for 2-3 seconds after the ignition is switched on and the parking brake is released. | Yes | See the next step. |
No | - Check the brake fluid level; - Check for leaks brake tubes and hoses, the working brake cylinder and the brake master cylinder; - EBD warning lamp may include a control lamp ABS, if the ABS is defective; - At the released parking brake warning lamp may occasionally lights up when the ignition is on. |
3 | Diagnostic tool, check stored fault codes in memory. | Yes | Follow the appropriate verification. |
No | See the next step. |
4 | After a trip and check the stored fault codes go back to step 3. | Yes | Follow the appropriate verification. |
No | - Check the connection of connectors; - The system is in order. |