add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Rio
Home
 
Kia
Rio
Instructions
Engines A3E, A5D
Greasing system
Cooling
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Wheels and tires
Steering
Brakes
Technical data
Check the brake servo using devices
One-way vacuum valve
Vacuum brake booster
Bleeding the hydraulic system of a drive of brakes
Check of brake tubes
Check and replacement of brake hoses
Brake pedal
Replacing the front brake pads
Replacing brake pads on the rear drum brakes
Repair the brake caliper
Repair of the working brake cylinder
The main brake cylinder
The pressure
Parking brake
ABS control unit
Hydraulic control unit (HCU)
The front wheel speed sensor
Rear wheel speed sensor
A gear rotor of the wheel speed sensor
Main inspection
Checking functionality
Body
The air conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

The front wheel speed sensor



Withdrawal

PERFORMANCE ORDER
1. Disconnect the negative battery terminal.
2. Remove the sensor from the steering knuckle.
3. Remove the mounting clamp sensor wires.
4. After removing the trim, remove the wheel speed sensor and the connector in the engine compartment.

Check

PERFORMANCE ORDER
1. Measure the resistance of the wheel speed sensor.

Resistance: 1.3-1.5 ohms

2. If necessary, replace the wheel speed sensor.

Setting

PERFORMANCE ORDER
1. Install the wheel speed sensor and connect the connector.

Torque: 8-12 N ??? m

2. Place finish.
3. Install the ABS sensor to the terminal.
4. Install the ABS sensor in the steering knuckle.
5. Connect the cable to the negative terminal of the battery.




« previos page
Hydraulic control unit (HCU)
next page »
Rear wheel speed sensor

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.