1. Lift the front of the car and fix on supports. |
2. Remove the front wheels. |
3. Remove the two protective cover, remove the two screws and remove the caliper. |
4. Remove the brake pads and brake pad support plate. |
5. Measure the thickness of the brake pads. The minimum thickness of the brake pads: 2.0 mm |
6. nakidnym wrench, disconnect the brake line, thus collect the leaked brake fluid. |
7. Remove the two screws and remove the holder of a support. |
8. Measure the brake disc in four places circumferentially. Minimum brake disk thickness: 20 mm |
| 9. The indicator of hour type measure palpation of a brake disk. Maximum runout: 0.06 mm |
A warning Excessive run-out can be caused by a free wheel bearing.
|
10. Remove the two screws and remove the brake disc. |
11. Remove rust and step around the perimeter of the brake disc. If necessary, replace the brake disc. |