add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Rio
Home
 
Kia
Rio
Instructions
Engines A3E, A5D
Greasing system
Cooling
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Wheels and tires
Steering
Brakes
Technical data
Check the brake servo using devices
One-way vacuum valve
Vacuum brake booster
Bleeding the hydraulic system of a drive of brakes
Check of brake tubes
Check and replacement of brake hoses
Brake pedal
Replacing the front brake pads
Replacing brake pads on the rear drum brakes
Repair the brake caliper
Repair of the working brake cylinder
The main brake cylinder
The pressure
Parking brake
ABS control unit
Hydraulic control unit (HCU)
The front wheel speed sensor
Rear wheel speed sensor
A gear rotor of the wheel speed sensor
Main inspection
Checking functionality
Body
The air conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

Bleeding the hydraulic system of a drive of brakes



Any hydraulic system works normally if air is removed from it.

PERFORMANCE ORDER
1. Lift the car and fix on support.

A warning

The liquid in the tank popolnitelnom brake system should be maintained at 3/4 or higher in the course of pumping.

During air removal add only the pure liquid recommended by the manufacturer.


2. Remove the cap from the bleeder, and connect to it a hose.
3. Place the other end of the hose in a glass container of sufficient volume.
4. Slowly depress the brake pedal several times.

5. When the brake pedal depressed key OK130 430 019, loosen the bleeder valve and release the air from the hydraulic system.

A warning

The brake pedal must be depressed as long as the bleeder valve is not tightened.


6. Repeat steps 4-5 until the until the brake liquid without air bubbles.
7. Check the operation of the brakes.
8. Check for leaks of brake fluid.
9. Add a brake liquid in a tank of brake system popolnitelny.

Torque: 5,9-8,8 N ??? m





« previos page
Vacuum brake booster
next page »
Check of brake tubes

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.