REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
			Technical data
			Check the brake servo using devices
			One-way vacuum valve
			Vacuum brake booster
			Bleeding the hydraulic system of a drive of brakes
			Check of brake tubes
			Check and replacement of brake hoses
			Brake pedal
			Replacing the front brake pads
			Replacing brake pads on the rear drum brakes
			Repair the brake caliper
			Repair of the working brake cylinder
			The main brake cylinder
			The pressure
			Parking brake
			ABS control unit
			Hydraulic control unit (HCU)
			The front wheel speed sensor
			Rear wheel speed sensor
			A gear rotor of the wheel speed sensor
			Main inspection
			Checking functionality
		Body
		The air conditioning system
		Electrical equipment

Rear wheel speed sensor

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
	2. Remove the bolt of the rear shock.
	3. Remove the gauge from the brake shield.
4. Release clip securing the sensor wires.
	5. After removing the rear seats and rear side door trim, remove the ABS sensor and connector.

Setting

PERFORMANCE ORDER

1. Install the ABS sensor and connector.

2. Install the rear seat and rear side door trim.

3. Clip the sensor wire.

4. Install the ABS sensor in the brake shield.

Torque: 8-12 N ??? m

5. Screw the lower rear shock bolt.

Torque: 78-98 N ??? m

6. Connect the cable to the negative terminal of the battery.