 printable version
Replacing bulbs
REPLACEMENT LAMPS LIGHTS (four-MODEL)
A warning  When replacing the lamp Protect eyes. Wait for the lamp to cool, and only then replace it.
Halogen lamps filled with gas under pressure. In case of breaking halogen lamp to explode and its fragments will scatter in different directions.
Always consult carefully with the halogen lamp, and avoid scratches and scrapes. If the lamps are lit, prevent their contact with liquids. Never touch the glass with bare hands. Remains of fat can cause overheating and lead to an explosion of the lamp when it burns. The lamp can be turned on only after installation.
| PERFORMANCE ORDER | | 1. Open the hood. | | 2. Disconnect the electrical connector from the bulb by pressing the connector on both sides. | | 3. Release the wire spring that secures the lamp lights by clicking on its end and pulling upwards. | | 4. Remove the bulb from the three slots on the lamp. | | 5. Install the new lamp into the three slots on the lamp and snap the wire spring that secures the lamp in the locked position. | | 6. Connect the headlamp bulb electrical connector. |
|
FRONT LAMP REPLACEMENT indicator / parking lamps | PERFORMANCE ORDER |  | 1. Turn the bulb holder parking lamps counterclockwise pull it out of the unit lights. | | 2. Remove the bulb from the socket by pulling it. | | 3. Install a new bulb in the socket. | | 4. Install the bulb holder parking lamps in headlamp unit and turn it clockwise to lock the cartridge in place. |
|
REPLACING THE LAMP rear indicators | PERFORMANCE ORDER | | 1. Use a Phillips screwdriver to remove the screws that secure the rear combination lamp to the body. |  | 2. Carefully remove the lamp assembly from the vehicle. |  | 3. Turn the bulb holder anticlockwise and remove it from the body. | | 4. Click on the bulb and turn it a quarter turn counterclockwise, and then remove the bulb from the socket. | | 5. Insert a new bulb into the socket, then press the bulb and turn it a quarter turn clockwise to lock the bulb in place. |  | 6. Install the bulb socket in the rear combination lamp and turn it a quarter turn clockwise to lock the cartridge in place. | | 7. Carefully place the lamp assembly on the vehicle. |
|
REPLACEMENT LAMPS Dome Light | PERFORMANCE ORDER |  | 1. Using a flat-blade screwdriver, gently slide the glass ceiling light from the body. | | 2. Press the bulb inwards, then rotate it one-quarter turn counterclockwise and remove the bulb from the socket. | | 3. Insert a new bulb into the socket, then gently push the bulb in and turn it a quarter turn clockwise so that the lamp replace. | | 4. Attach the two glass ceiling light to the body in accordance with the notches and snap the glass into place. |
|
REPLACING THE LAMP license plate light | PERFORMANCE ORDER | | 1. Use a screwdriver to screw Phillips, unscrew the two screws that serve for fixing glass and remove glass. | | 2. Carefully remove the bulb from the socket. | | 3. Insert a new bulb in the socket. |  | 4. Replace the glass and secure with two bolts. |
|
|
