printable version

System operation

Ventilation

PERFORMANCE ORDER

1. Set the mode dial to . 2. Set the air supply to the desired position. 3. Set the temperature control knob to the desired position. 4. Set the speed controller to the desired position of the fan.

Heating

PERFORMANCE ORDER

1. Set the mode selection knob to the position . 2. Set the air supply to the desired position. 3. Set the temperature control knob to the desired position. 4. Set the fan speed control to the desired position 5. If you want to heat the interior and at the same time reduce the humidity, the air conditioner. 6. If you want to level the person was a cold air, including a two-tier work, moving the handle of the mode dial . 7. If the windscreen misted, set the mode selection knob to the position .

Air Conditioning

All air-conditioning systems of cars Kia filled with refrigerant R134a, has no harmful effect on the environment and the ozone layer of the atmosphere.

Defrosting, demisting the windscreen

The inner side of the windscreen

PERFORMANCE ORDER

1. Set the position of underfloor heating (floor-defrost) or just stand heating (defrost) . 2. If the current supply of outdoor air conditioning or fresh air is not required, press the corresponding button to cancel these functions. 3. Set the desired temperature. 4. Set the desired fan speed, except for the position "0" (zero). 5. Air conditioning is activated automatically when installing the feed position of external (fresh) air. A warning Do not use this position when the air conditioner is operating and very wet weather. The temperature difference between the outside air and the windshield can lead to fogging glasses and, therefore, reduce visibility.

The outer surface of the windscreen

PERFORMANCE ORDER

1. Set a heating position (defrost) . 2. Set the fan to the position of "3" or "4". 3. Set the temperature to the position of maximum heat. 4. Air conditioning system is switched depending on the detected value of the ambient temperature and sets an outside (fresh) air. If the current supply of outdoor air conditioning or fresh air is not required, press the corresponding button to cancel these functions. 5. In order to maximize the effectiveness of de-icing the windscreen, turn the temperature control knob to the right of refusal - the maximum temperature, and handle control the fan speed set at maximum speed. If you want to deicing / defogging of the windscreen to the floor fed warm air, set the mode dial to this position. 6. Before the start of the trip is necessary to remove all snow and ice from the windscreen and rear glass, door mirrors, and all side windows. Remove all snow and ice from the hood and air intake grilles on the hood ventilation to achieve maximum efficiency of heating of the windshield and reduce the probability of fogging and icing.

How to cancel forced air-conditioning and a delivery outside (fresh) air position when incorporated floor heating and a simple heating (floor-defrost and defrost)

If you choose a position Floor-Defrost or Defrost, the system automatically activates the air conditioning and selects an external position (fresh) air.

If you are currently using one of the above conditions and do not need the air-conditioned or outdoor fresh air, you can turn off the system as follows:

- Set the fan speed control to position 0 (zero);
- Turn the mode switch to heating 030;
- Click on the recirculation of at least 5 031 times 3. After that, the indicator light flashes air recirculation button 3 times in 0.5 - second intervals.

If you want to resume the operation of the automatic air conditioning system and the supply of external (fresh) air, perform the identical procedure.

Proceed in an identical manner, if you want to return to the position of the forced feeding of external (fresh) air when the engine is started.