REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sportage (1999 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sportage
		Introduction
		Controls and operation receptions
		Current care and maintenance
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system, motor control / emission control and exhaust
		Systems of an electric motor
		A five-speed manual gearbox gear
		Automatic Transmission
		Transmission Line
		Brakes
		Suspension and steering
		Body
		Onboard electric
			General information and precautions
			Search of causes of failures of electrical equipment
			Safety locks - the general information
			Circuit breakers - the general information
			Relay - the general information and check of serviceability of functioning
			Mounting fuse / relay box - general information, removal, installation, replacement of fuses
			The system timer and alarm gongs (ETWIS) - general information, removal and installation of the control module
			Check of serviceability of functioning of the ignition switch
			Check of serviceability of functioning of the steering column switch
			Check of serviceability of functioning of the control switches and electric drive windows
			Check of serviceability of functioning of the control switch and electric adjustment door mirrors
			Cabin lighting - lamp replacement, check of serviceability of functioning
			Replacement lamps and check of serviceability of functioning of external lighting
			Removal, check of serviceability of functioning and installation of the flasher / alarm
			Removal, installation and adjustment of the headlight units
			Airbags - general information and precautions
			Disable SRS
			Read the DTC code
			Removing and installing driver's airbag module
			Removal, installation and adjustment of the contact cable reel driver airbag module
			Removing and installing airbag diagnostic module (ADU)
		The control body dimensions
		Wiring

printable version

Disable SRS

Diagnostic unit (ADU) of additional security features self-powered.

Before proceeding to the removal of any SRS components should generate shutdown system.

PERFORMANCE ORDER

Turn the ignition switch to LOCK, disconnect the wiring from the battery (negative cable first, then positive) and wait at least 10 minutes necessary for discharging a standalone power source SRS, - to ensure complete discharge switch lights.
To enter the SRS effect, connect the battery and switch on the ignition, - a control lamp to be activated for about 6 seconds and then goes off.

« previos page
Airbags - general information and precautions

next page »
Read the DTC code