- Turn on the ignition, warning lamp SRS (see chap. Controls and operation receptions) should be activated for about 6 seconds, confirming serviceability of the system state.
- Failure of a lamp indicates disconnection self-diagnostic system detecting a violation of any of the components of SRS, information about which is stored in the processor's memory management module.
- Turn the ignition switch to LOCK.
- Open the hood and look at the left rear corner of the diagnostic socket DLC, - connector attached to the body and the air cleaner is equipped with a hinged lid.
- Connect DLC diagnostic scanner (see. Power supply systems, engine control / emission control and exhaust), and then switch on the ignition and read the stored control module DTC. The list of codes are listed in the Specifications of the Head the Onboard electric equipment.
- Disconnect the reader make the necessary corrections, and then clear the memory of the processor by disconnecting the negative wire from the battery at the time of about 30 seconds.
|
|