|
|
 printable version
Changing the oil filter
|  | - Unscrew the oil filter. The oil filter is looking in the direction of movement, behind the engine block. To loosen the filter there is a special tool, for example, HAZET 2172. You can also score in the side of the filter sharp screwdriver. This will drain the oil - substitute container.
|
- Clean the oil filter flange on the cylinder block fuel. Remove the filter gasket.
- Lightly coat the rubber gasket on the engine oil filter.
|
|
| - Gasoline Engine: Screw the new filter by hand. When the filter gasket is adjacent to the cylinder block, tighten the filter an additional 1/2 turn. Follow the instructions on the filter.
 | Filters may be used only designed for this model. |
|
|
| - Diesel engine: Screw the filter by hand until the gasket is adjacent to the oil cooler. Then tighten the clamping band filter 7/8 turn. Follow the instructions on the filter.
| Filters may be used only designed for this model. |
|
|
|
|
