 printable version
PTO
1. Lift the rear of the vehicle. 2. Mark the relative position of the flange of the rear section propeller shaft and pinion gear (see photo). 3. Remove the four screws on the flange of the rear section with a flange pinion gear. 4. In the two-section driveshaft unscrew bolts average support. 5. Slide the propeller shaft and disconnect from the rear flange, and then lower the output propeller shaft of the transmission. 6. Stop the hole in the gearbox, 7. Install in the reverse order. Combine the labels put at removal.
| 
