1. Remove the dust cap from the wheel cylinder bleeder, clean it and put it on him with a hose kit. |
2. Loosen half turn the bleeder valve. |
3. Gently press the brake pedal to stop and slowly release it to its original position. |
4. Repeat this process for as long as the bleeding from the union will not be a brake liquid without air bubbles. |
5. Tighten the bleeder valve until it stops, remove it from the tube and put the dust cap. |
A warning At air removal constantly watch presence of a brake liquid in a tank, without supposing an exposure of its bottom as thus in air again will get.
|