printable version
Ventilation (fresh air supply to the salon)
When the following position of the control of the nozzles 3 and 4 shall be submitted not preheated fresh air.
PERFORMANCE ORDER | 1. Switch B (see. Fig. Controls ventilation and heating systems) deliver to the desired level. | 2. Turn the knob A counter-clockwise until it stops. | 3. Handle C on . | 4. fogged windshield put a handle on C . | 5. The nozzles 3 and 4 open. | 6. At the request of the handle C can also be assigned to another position. |
|
To HEATING work reliably, you need an opening for fresh air intake, located in front of the windshield, keep clean from ice, snow and leaves.
At any intermediate position can be set only handles A and C.
To avoid fogging, should be at a low vehicle speed switch in turn constantly lower stage fan mode, and put in position C .
The heating capacity of the heating system depends on the temperature of the coolant of the engine - so the greatest heating occurs when at operating temperature engine.
Used air is removed through outlets under the rear window. When holding items of clothing on the shelf luggage you must see to it that these holes are not blocked.
|