REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
			Technical data
			Check the brake servo using devices
			One-way vacuum valve
			Vacuum brake booster
			Bleeding the hydraulic system of a drive of brakes
			Check of brake tubes
			Check and replacement of brake hoses
			Brake pedal
				Installation height of the brake pedal
				Free running of the brake pedal
				The distance from the floor of the brake pedal
			Replacing the front brake pads
			Replacing brake pads on the rear drum brakes
			Repair the brake caliper
			Repair of the working brake cylinder
			The main brake cylinder
			The pressure
			Parking brake
			ABS control unit
			Hydraulic control unit (HCU)
			The front wheel speed sensor
			Rear wheel speed sensor
			A gear rotor of the wheel speed sensor
			Main inspection
			Checking functionality
		Body
		The air conditioning system
		Electrical equipment

printable version

Installation height of the brake pedal

Check

Measure the distance from the center of the brake pedal to the floor carpet.

Distance: 170 176 mm

Adjustment

PERFORMANCE ORDER

1. Disconnect from the switch stopsignalov.

2. Loosen the lock nut B, turn the switch until it engages the pedal.

3. Loosen the lock nut D and, rotating pusher C, adjust the height of the installation of the brake pedal. If necessary, unscrew the switch to prevent its contact with the brake pedal.

4. Replace the switch so that its plunger was completely drowned in the switch housing, then turn the switch on the S turn. Tighten the lock nuts B and D.

Torque: 23,534,3 N ??? m

5. Connect to the switch and test the stopsignalov stopsignalov.

« previos page
Brake pedal

next page »
Free running of the brake pedal