- When the rear window heater box with visible wires after some time must be free from precipitation or ice.
- At malfunction first check the fuse in the fuse box.
- If the fuse is OK, check the tightness of the plug to the left and right of the rear window, if necessary, cleaned of corrosion.
- If the heater does not work, check the wires to the switch, see chap. Electrical system.
- Check the operation of the relays. See section Checking the relay.
 | - If a conductor of a heater is broken, rescue standard silver conductive paint. To do this, clear the area of repair diluent or ethylene.
|
- Place glue on both sides of the cliff with adhesive tape and apply a thin brush with silver paint.
- Writing the paint to dry for 24 hours at a temperature of 25 ?� C. You can also use the hair dryer hot air. At a temperature of 150 ?� C for 30 minutes the paint dries.
 | Do not include rear window heater until the paint dries. Do not use gasoline or other solvents. |
|
|
