- Remove the wiper arm glass tailgate.
- Remove the power button lock, remove the trim panel of the tailgate (six screws).
- Remove the screw facing the internal handle and remove the trim.
- Release the latches on the panel.
- Loosen the lock ring and remove the body from the opening seal roller cleaner.
- Disconnect the two wires from the rear screen.
- Unscrew the drive glass cleaner, take the drive out of the opening of the body and secure it.
- With the help of an assistant, remove the seal glass and push the glass from the inside.
- Apply a layer of sealant into the groove of the opening of the body, tuck the cord seal.
- Place the glass in the body opening and pulling the cord, put the seal on the flange opening. This assistant should gently press down on the glass. The rest of the setup operations are performed in reverse order of removal. Before tightening the mounting bolts align the wiper drive roller relative to the surface of the glass.
|
|